¿Qué es la bomba de agua?

Las bombas de agua tienen diferentes usos, diferentes medios líquidos de transporte, diferentes caudales y diferentes rangos de elevación. Por lo tanto, por supuesto, sus formas estructurales y materiales también son diferentes. En resumen, se pueden dividir aproximadamente en: 1. Suministro de agua urbana 2, sistema de alcantarillado 3, ingeniería civil, sistema de construcción 4, sistema de conservación de agua agrícola 5, sistema de central eléctrica, 6, sistema químico 7, sistema de industria petrolera 8, sistema de minería y metalurgia 9, sistema de industria ligera 10, sistema de barcos.

1. If the bomba de agua has any small fault, remember not to let it work. If the packing of the bomba de agua shaft is worn out, it should be added in time. If the bomba de agua is continued to be used, air will leak.

2. If the bomba de agua vibrates strongly during use, be sure to stop and check the cause, otherwise it will also cause damage to the pump.

3. The bomba de agua must be maintained after use. For example, when the bomba de agua is used up, the water in the bomba de agua should be cleaned up. It is best to remove the water pipe and rinse it with clean water.

4. The tape on the bomba de agua should also be removed, then rinsed with water and dried in the light. Do not put the tape in a dark and humid place. The tape of the bomba de agua must not be stained with oil, let alone some sticky things on the tape.

Energy conservation and emission reduction have become the main content of China's economic development plan, especially for power, steel, non-ferrous metals, petrochemicals, tratamiento del agua and other industries with high energy consumption, more stringent emission reduction policies have been put forward. As the fluid conveying equipment in the industrial center, the bomba de agua occupies the main part of energy consumption, and it has become the main problem to be solved in the energy saving operation.

The most common way to drive the bomba de agua is to drive it with an electric motor. The energy saving method of the pump is mainly to make the pump unit (pump, prime mover and conversion part) run at the highest power, so that the electric energy consumed by the external input is reduced to the lowest point. The energy saving of the pump is a comprehensive technology, which involves the energy saving of the pump itself, the energy saving of the system and the operation of the application management.