RO Pure Water Treatment is the most precise membrane liquid separation technology. The operating pressure is applied on the side of the inlet water and the concentrated solution to overcome the natural osmotic pressure.
When the operating pressure higher than the natural osmotic pressure is dropped on the side of the concentrated solution water molecules naturally permeate the flow The direction will be reversed, and the water molecules in the influent concentrated solution pass through the reverse osmosis membrane to become the purified water om the dilute solution side Reverse osmosis suitable equipment can block all soluble salts and organic substances with a molecular weight greater than 100. but allow water molecules to pass through, The salt rejection rate of reverse osmosis composite membranes is generally greater than 98%.
Tratamiento de agua pura RO
Most of our projects use DOW Filmtec, Toray, Vontron, Hydranautics, LG brands. They are well-known brands in the water treatment industry.
The reverse osmosis membrane is the core element to realize reverse osmosis, and it is an artificial semipermeable membrane with certain characteristics made by simulating biological semipermeable membrane. Generally made of polymer materials. Such as cellulose acetate film, aromatic polyhydrazide film, aromatic polyamide film. The diameter of the surface pores is generally between 0.5 and 10 nm, and the permeability is related to the chemical structure of the membrane itself. Some polymer materials have good repellency to salt, but the permeation speed of water is not good. The chemical structure of some polymer materials has more hydrophilic groups, so the permeation speed of water is relatively fast. Therefore, a satisfactory reverse osmosis membrane should have an appropriate amount of permeation or salt rejection.
Additionally, commercial RO water treatment systems can incorporate chemicals such as anti-scaling (scaling inhibitors), anti-fouling, pH adjustment, sterilization and disinfection chemicals in the pre- or post-treatment. We keep a close eye on the water treatment industry and add new water technologies to our reverse osmosis water plants.
When checking the customer's water quality analysis report, sometimes due to scaling and scaling problems, we can use the CIP (cleaning-in-place) system to clean the membrane in the membrane shell to make the membrane longer life. It is a new type of water treatment technology most used in the water treatment industry.
Potencia eléctrica de los sistemas comerciales de tratamiento de agua por ósmosis inversa
Para plantas comerciales de purificación de agua necesitan 220-380 V / 50 Hz / 60 Hz. Para una mayor capacidad, especialmente para el sistema de ósmosis inversa industrial, debido a la bomba de alta presión, necesita 380 V 50 / 60 Hz. En lo que respecta al diseño de su máquina comercial de filtración de agua por ósmosis inversa, verificaremos su suministro eléctrico y decidiremos si le fijamos la energía. Además, tenemos algunos métodos de ahorro de energía para reducir el costo eléctrico, las nuevas tecnologías de tratamiento de agua de Chunke lo ayudan a reducir su mayor costo para el funcionamiento del sistema.
Antes de comprar un sistema comercial de purificación de agua, debe saber:
1. Capacidad de producción de agua pura (L / día, L / hora, GPD).
2. Informe de análisis de TDS y agua cruda del agua de alimentación (evite el problema de incrustaciones e incrustaciones)
3. El hierro y el manganeso deben eliminarse antes de que el agua cruda ingrese a la membrana de filtración de agua por ósmosis inversa
4. El TSS (sólido suspendido total) debe eliminarse antes de la membrana del sistema comercial de purificación de agua.
5. El SDI (índice de densidad de sedimentos) debe ser inferior a 3
6. Debe asegurarse de que su fuente de agua no tenga aceite ni grasa
7. El cloro debe eliminarse antes del sistema comercial de tratamiento de agua
8. Voltaje y fase de energía eléctrica disponibles
9. Diseño del lugar para el sistema comercial de ósmosis inversa ROSetícula de operación para sistemas comerciales de tratamiento de agua RO
TDS del agua de alimentación: 0 - 1000 ppm
|
Dureza superior a 18 ppm Necesita dosificación de antiincrustante
|
La turbidez debe ser
Quitado
|
Temperatura máxima del agua de alimentación: 42 °C
|
Opere con resultados de TDS más altos y más bajos
Recuperación
|
H2S debe ser
Quitado
|
Tolerancia al pH: 3-11
|
Contenido máximo de hierro: 0,05 ppm
|
|
Presión del agua de alimentación: 1,5 a 6 bar
|
Max. Tolerancia a la sílice: 60 ppm
|
|
Contact us to learn more about our industrial reverse osmosis systems and commercial RO water plants. Our sales team and technical team will be happy to share new water treatment technologies for your project.